Warning: Last items in stock!
The dedicated PSU for 16 Pixelstrips is necessary to give power to your Pixelstrips. Each PSU has a Klingnet in and output (CAT-5) and has 4 CAT-5 outputs to give power and data to your Pixelstrips. Every output is designed to give power to a maximum of 4 Pixelstrips. The PSU has a 90V-264V multi-voltage input and is equipped with Neutrik Powercon in- and outputs.
By introducing the DMT Pixelstrip Pixelbatten and Pixelfloor DMT introduces a new and revolutionary concept which makes pixel control easy and affordable. DMT has been licensed to introduce the new protocol created by ArKaos Interactive Visual Technologies for controlling pixel driven fixtures: Kling-Net. Kling-Net is an unique, stable and very user friendly protocol. In the past it was necessary to use a lot of interfaces or expensive nodes, Kling-Net now only requires a simple CAT-5 cable. There is no need for any interface or converter anymore, just plug and play. That's Kling-Net, as simple as ABC, the new standard for pixel control.
The DMT PixelStrip and PixelBatten are the first introduced fixtures of a wide range of pixel driven fixtures which combine easy operation and affordable cost.
How does it work?
Step 1: Install DMT VisionExpress on your laptop or Mac book this will already include the Kling-Net protocol.
Step 2: Connect the Pixelstrips and Pixelbatten by a CAT-5 cable with your laptop or Mac book. Once you have connected the fixtures, the VisionExpress software immediately recognizes them.
Step 3: Map the devices to the right position, a step which is very easy because you can actually drag and drop the fixtures in an onscreen interface into the right position. This only requires a few minutes and you're ready to go. DMT VisionExpress is developed by ArKaos and it includes all major functionalities to control your visuals. It also has DMX control which allows you to synchronize the visuals with your lightshow.
Be part of the future and join the Kling-Net family today !
2x CAT-5 Klingnet in and output
4x CAT-5 Power/Data output
Power supply: 100-240V / 50-60Hz
Power consumption: 300W
Dimensions: 253 x 230 x 74mm
Weight: 3 kg
Accessoiries included: Powercon input cable, Powercon linkcable